AZM300Z-I1-ST-1P2P Schmersal Safety Switches

Product Details

• Guard locking monitored
  Yes
• Note (Mechanical lifetime)
  When using as door stop: ≥ 50.000 operations (door mass ≤ 5 kg and actuating speed ≤ 0.5 m/s)
• Switch distance
  2 mm
• Standards
  IEC 61508, IEC 60947-5-3, EN ISO 13849-1
• Height of sensor
  35 mm
• Note (Relative humidity)
  non-condensing, non-icing
• Rated impulse withstand voltage Uimp
  0.8 kV
• Classification ZVEI CB24I, Source
  C2
• Current consumption at 24V
  10 mA
• Current, Utilisation category DC12
  0.05 A
• Coding level according to ISO 14119
  High
• Duration of risk, maximum
  200 ms
• Safety functions
  Yes
• Tightening torque of the fixing screws, minimum
  6 Nm
• Terminal Connector
  Connector M12, 8-pole, A-coded
• Relative humidity, maximum
  93 %
• Storage and transport temperature, minimum
  -10 °C
• Current consumption with solenoid ON, peak
  350 mA / 200 ms
• Current, Utilisation category DC13
  0.05 A
• Mechanical life, minimum
  1,000,000 Operations
Ensured switch distance ON Sao
1 mm
Note (length of the sensor chain)
Cable length and cross-section change the voltage drop dependiing on the output current
Storage and transport temperature, maximum
+90 °C
No-load supply current I0
100 mA
Voltage, Utilisation category DC13
24 VDC
Test pulse duration, maximum
0.5 ms
general information
Individual coding
Response time safety outputs in case of switch-off by safety inputs, maximum
1.5 ms
Series-wiring
Yes
Gross weight
550 g
Ensured switch distance OFF Sar
20 mm
Note (series connection of the sensors)
Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Overvoltage category
III
Switching frequency, maximum
0.5 Hz
Current leakage Ir
0.5 mA
Frequency band RFID
125 kHz
Active principle
RFID
Short-circuit recognition
Yes
Angular offset between interlocking device and actuator, maximum
2 °
Latching force, adjustable, position 1
25 N
Ambient temperature, minimum
+0 °C
Protection rating
III
Current consumption with solenoid ON, average
200 mA
Duty cycle solenoid
100 %
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Response time safety outputs in case of switch-off by actuator, maximum
100 ms
Number of fail-safe digital outputs
2
Latching force, adjustable, position 2
50 N
Length of sensor chain, maximum
200 m
Rated insulation voltage Ui
32 VDC
Degree of pollution to IEC/EN 60664-1
3
External wiring and device fuse rating
2 A gG
Test pulse interval, typical
1000 ms
Classification ZVEI CB24I, Sink
C1, C2
Time to readiness, maximum
5,000 ms
Latching
Yes
Integral System Diagnostics, status
Yes
Type of the fixing screws
2x M6
Width of sensor
87.5 mm
Ambient temperature, maximum
+60 °C
Operating voltage, maximum
26.4 VDC
Tightening torque for the fixing screws, maximum
7 Nm
Degree of protection
IP66 to EN 60529, IP67 to EN 60529, IP69 to EN 60529
Manual release
Yes
Clamping force in accordance with ISO14119 Fzh
1,150 N
Zulässige Aufstellhöhe über NN, maximum
2,000 m
Notes (Power supply, general)
stabilised PELV power supply
Versions
short-circuit proof, p-type
Test pulse interval, minimum
100 ms
Transmit power, maximum
-6 dB/m
Power to unlock
Yes
Short circuit detection
Yes
Clamping force, maximum Fmax
1,500 N
Length of sensor
120 mm
Restistance to shock
30 g / 11 ms
Operating voltage, minimum
20.4 VDC
Required rated short-circuit current to EN 60947-5-1
100 A
Voltage drop Ud, maximum
4 V
Switching thresholds
−3 V … 5 V (Low), 15 V … 30 V (High)
Voltage, Utilisation category DC12
24 VDC

AZM300Z-I1-ST-1P2P Related Documents