AZM300B-ST-SD2P-A-T Schmersal Safety Switch Interlocks

Product Details

• Gross weight
  645 g
• Response time safety outputs in case of switch-off by safety inputs, maximum
  1.5 ms
• Note (Mechanical lifetime)
  When using as door stop: ≥ 50.000 operations (door mass ≤ 5 kg and actuating speed ≤ 0.5 m/s)
• Latching force, adjustable, position 2
  50 N
• Length of sensor chain, maximum
  200 m
• Ambient temperature, minimum
  +0 °C
• Protection rating
  III
• No-load supply current I0
  100 mA
• Active principle
  RFID
• Response time safety outputs in case of switch-off by actuator, maximum
  100 ms
• Number of fail-safe digital outputs
  2
• Clamping force, maximum Fmax
  1,500 N
• Terminal Connector
  Connector M12, 8-pole, A-coded
• Storage and transport temperature, minimum
  -10 °C
• Operating voltage, minimum
  20.4 VDC
• Duty cycle solenoid
  100 %
• Current, Utilisation category DC13
  0.05 A
• Coding level according to ISO 14119
  Low
• Latching
  Yes
• Mechanical life, minimum
  1,000,000 Operations
Tightening torque for the fixing screws, maximum
7 Nm
Note (series connection of the sensors)
Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD
Relative humidity, maximum
93 %
Overvoltage category
III
Required rated short-circuit current to EN 60947-5-1
100 A
Current consumption at 24V
5 mA
Test pulse interval, typical
1000 ms
Transmit power, maximum
-6 dB/m
Duration of risk, maximum
200 ms
Emergency exit
Yes
Tightening torque of the fixing screws, minimum
6 Nm
Latching force, adjustable, position 1
25 N
Degree of protection
IP66 to EN 60529, IP67 to EN 60529, IP69 to EN 60529
Frequency band RFID
125 kHz
Power to lock
Yes
Safety functions
Yes
Type of the fixing screws
2x M6
Note (length of the sensor chain)
Cable length and cross-section change the voltage drop dependiing on the output current
Storage and transport temperature, maximum
+90 °C
Rated impulse withstand voltage Uimp
0.8 kV
Current consumption with solenoid ON, peak
350 mA / 200 ms
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Short circuit detection
Yes
Clamping force in accordance with ISO14119 Fzh
1,150 N
Angular offset between interlocking device and actuator, maximum
2 °
Length of sensor
146 mm
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Operating voltage, maximum
26.4 VDC
Switching frequency, maximum
0.5 Hz
Time to readiness, maximum
5,000 ms
Short-circuit recognition
Yes
Ensured switch distance ON Sao
1 mm
Height of sensor
55 mm
Rated insulation voltage Ui
32 VDC
External wiring and device fuse rating
2 A gG
Voltage, Utilisation category DC13
24 VDC
Restistance to shock
30 g / 11 ms
Notes (Power supply, general)
stabilised PELV power supply
Test pulse duration, maximum
0.5 ms
Versions
short-circuit proof, p-type
Voltage, Utilisation category DC12
24 VDC
Operation current
150 mA
Standards
EN ISO 13849-1, EN ISO 14119, IEC 60947-5-3
Serial diagnostics
Yes
Integral System Diagnostics, status
Yes
Ensured switch distance OFF Sar
20 mm
Ambient temperature, maximum
+60 °C
Zulässige Aufstellhöhe über NN, maximum
2,000 m
Current consumption with solenoid ON, average
200 mA
Classification ZVEI CB24I, Sink
C1, C2
general information
Universal coding
Actuator monitored
Yes
Series-wiring
Yes
Switch distance
2 mm
Width of sensor
87.5 mm
Note (Relative humidity)
non-condensing, non-icing
Degree of pollution to IEC/EN 60664-1
3
Switching thresholds
−3 V … 5 V (Low), 15 V … 30 V (High)
Voltage drop Ud, maximum
4 V
Test pulse interval, minimum
100 ms
Wiring capacity
50 nF
Current, Utilisation category DC12
0.05 A
Current leakage Ir
0.5 mA
Classification ZVEI CB24I, Source
C2

AZM300B-ST-SD2P-A-T Related Documents