AZM300Z-I2-ST-SD2P-A Schmersal Safety Switches

Product Details

• Gross weight
  585 g
• Enclosure material
  Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
• Guard locking monitored
  Yes
• Safety functions
  Yes
• Tightening torque for the fixing screws, maximum
  7 Nm
• Length of sensor
  120 mm
• Relative humidity, maximum
  93 %
• Overvoltage category
  III
• Duty cycle solenoid
  100 %
• Voltage drop Ud, maximum
  4 V
• Time to readiness, maximum
  5,000 ms
• Response time safety outputs in case of switch-off by safety inputs, maximum
  1.5 ms
• Note (Mechanical lifetime)
  When using as door stop: ≥ 50.000 operations (door mass ≤ 5 kg and actuating speed ≤ 0.5 m/s)
• Ensured switch distance ON Sao
  1 mm
• Active principle
  RFID
• Manual release
  Yes
• Number of fail-safe digital outputs
  2
• Latching force, adjustable, position 2
  50 N
• Note (length of the sensor chain)
  Cable length and cross-section change the voltage drop dependiing on the output current
• Note (Relative humidity)
  non-condensing, non-icing
Rated insulation voltage Ui
32 VDC
External wiring and device fuse rating
2 A gG
Classification ZVEI CB24I, Source
C2
Test pulse interval, typical
1000 ms
Coding level according to ISO 14119
High
Response time safety outputs in case of switch-off by actuator, maximum
100 ms
Clamping force in accordance with ISO14119 Fzh
1,150 N
Tightening torque of the fixing screws, minimum
6 Nm
Width of sensor
87.5 mm
Storage and transport temperature, maximum
+90 °C
Operating voltage, maximum
26.4 VDC
Switching thresholds
−3 V … 5 V (Low), 15 V … 30 V (High)
Wiring capacity
50 nF
Current, Utilisation category DC13
0.05 A
Latching force, adjustable, position 1
25 N
general information
Individual coding, multiple teaching
Duration of risk, maximum
200 ms
Series-wiring
Yes
Length of sensor chain, maximum
200 m
Ambient temperature, maximum
+60 °C
Zulässige Aufstellhöhe über NN, maximum
2,000 m
Current consumption with solenoid ON, peak
350 mA / 200 ms
Classification ZVEI CB24I, Sink
C1, C2
Current, Utilisation category DC12
0.05 A
Latching
Yes
Frequency band RFID
125 kHz
Mechanical life, minimum
1,000,000 Operations
Type of the fixing screws
2x M6
Note (series connection of the sensors)
Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Operating voltage, minimum
20.4 VDC
Required rated short-circuit current to EN 60947-5-1
100 A
Current consumption at 24V
5 mA
Power to lock
Yes
Integral System Diagnostics, status
Yes
Serial diagnostics
Yes
Transmit power, maximum
-6 dB/m
Clamping force, maximum Fmax
1,500 N
Terminal Connector
Connector M12, 8-pole, A-coded
Storage and transport temperature, minimum
-10 °C
Rated impulse withstand voltage Uimp
0.8 kV
Current consumption with solenoid ON, average
200 mA
Test pulse interval, minimum
100 ms
Versions
short-circuit proof, p-type
Standards
IEC 61508, IEC 60947-5-3, EN ISO 13849-1
Short-circuit recognition
Yes
Ensured switch distance OFF Sar
20 mm
Ambient temperature, minimum
+0 °C
Degree of pollution to IEC/EN 60664-1
3
Test pulse duration, maximum
0.5 ms
Operation current
150 mA
Voltage, Utilisation category DC13
24 VDC
Switch distance
2 mm
Short circuit detection
Yes
Angular offset between interlocking device and actuator, maximum
2 °
Height of sensor
35 mm
Protection rating
III
Notes (Power supply, general)
stabilised PELV power supply
Switching frequency, maximum
0.5 Hz
Current leakage Ir
0.5 mA
Restistance to shock
30 g / 11 ms
No-load supply current I0
100 mA
Degree of protection
IP66 to EN 60529, IP67 to EN 60529, IP69 to EN 60529
Voltage, Utilisation category DC12
24 VDC

AZM300Z-I2-ST-SD2P-A Related Documents