AZM300Z-ST-1P2P-A-T Schmersal Safety Switches

Product Details

• Active principle
  RFID
• Emergency exit
  Yes
• Angular offset between interlocking device and actuator, maximum
  2 °
• Tightening torque of the fixing screws, minimum
  6 Nm
• Length of sensor chain, maximum
  200 m
• Ambient temperature, maximum
  +60 °C
• Restistance to shock
  30 g / 11 ms
• Operating voltage, minimum
  20.4 VDC
• Coding level according to ISO 14119
  Low
• Duration of risk, maximum
  200 ms
• Safety functions
  Yes
• Clamping force, maximum Fmax
  1,500 N
• Terminal Connector
  Connector M12, 8-pole, A-coded
• Width of sensor
  87.5 mm
• Protection rating
  III
• No-load supply current I0
  100 mA
• Duty cycle solenoid
  100 %
• Transmit power, maximum
  -6 dB/m
• Short circuit detection
  Yes
• Number of fail-safe digital outputs
  2
Ensured switch distance ON Sao
1 mm
Note (length of the sensor chain)
Cable length and cross-section change the voltage drop dependiing on the output current
Storage and transport temperature, maximum
+90 °C
Zulässige Aufstellhöhe über NN, maximum
2,000 m
Time to readiness, maximum
5,000 ms
Standards
IEC 61508, IEC 60947-5-3, EN ISO 13849-1
Latching force, adjustable, position 2
50 N
Storage and transport temperature, minimum
-10 °C
Notes (Power supply, general)
stabilised PELV power supply
Test pulse interval, minimum
100 ms
Voltage, Utilisation category DC12
24 VDC
Type of the fixing screws
2x M6
general information
Universal coding
Series-wiring
Yes
Degree of protection
IP66 to EN 60529, IP67 to EN 60529, IP69 to EN 60529
Operating voltage, maximum
26.4 VDC
Classification ZVEI CB24I, Sink
C1, C2
Short-circuit recognition
Yes
Response time safety outputs in case of switch-off by actuator, maximum
100 ms
Latching force, adjustable, position 1
25 N
Ambient temperature, minimum
+0 °C
Relative humidity, maximum
93 %
Rated impulse withstand voltage Uimp
0.8 kV
Required rated short-circuit current to EN 60947-5-1
100 A
Frequency band RFID
125 kHz
Response time safety outputs in case of switch-off by safety inputs, maximum
1.5 ms
Guard locking monitored
Yes
Mechanical life, minimum
1,000,000 Operations
Switch distance
2 mm
Note (series connection of the sensors)
Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD
Rated insulation voltage Ui
32 VDC
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Latching
Yes
Integral System Diagnostics, status
Yes
Clamping force in accordance with ISO14119 Fzh
1,150 N
Length of sensor
146 mm
Ensured switch distance OFF Sar
20 mm
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Overvoltage category
III
Switching frequency, maximum
0.5 Hz
Gross weight
610 g
Note (Mechanical lifetime)
When using as door stop: ≥ 50.000 operations (door mass ≤ 5 kg and actuating speed ≤ 0.5 m/s)
Tightening torque for the fixing screws, maximum
7 Nm
Height of sensor
55 mm
Degree of pollution to IEC/EN 60664-1
3
External wiring and device fuse rating
2 A gG
Current leakage Ir
0.5 mA
Note (Relative humidity)
non-condensing, non-icing
Switching thresholds
−3 V … 5 V (Low), 15 V … 30 V (High)
Current, Utilisation category DC12
0.05 A
Current, Utilisation category DC13
0.05 A
Current consumption with solenoid ON, average
200 mA
Voltage, Utilisation category DC13
24 VDC
Current consumption with solenoid ON, peak
350 mA / 200 ms
Classification ZVEI CB24I, Source
C2
Voltage drop Ud, maximum
4 V
Current consumption at 24V
5 mA
Versions
short-circuit proof, p-type
Test pulse duration, maximum
0.5 ms
Test pulse interval, typical
1000 ms

AZM300Z-ST-1P2P-A-T Related Documents