AZM300Z-ST-1P2P-A Schmersal Safety Switches

Product Details

• Power to lock
  Yes
• Active principle
  RFID
• Clamping force, maximum Fmax
  1,500 N
• Latching force, adjustable, position 2
  50 N
• Length of sensor chain, maximum
  200 m
• Storage and transport temperature, maximum
  +90 °C
• Rated insulation voltage Ui
  32 VDC
• Required rated short-circuit current to EN 60947-5-1
  100 A
• Duty cycle solenoid
  100 %
• Voltage, Utilisation category DC12
  24 VDC
• Gross weight
  550 g
• Manual release
  Yes
• Note (Mechanical lifetime)
  When using as door stop: ≥ 50.000 operations (door mass ≤ 5 kg and actuating speed ≤ 0.5 m/s)
• Terminal Connector
  Connector M12, 8-pole, A-coded
• Height of sensor
  35 mm
• Operating voltage, maximum
  26.4 VDC
• External wiring and device fuse rating
  2 A gG
• Test pulse interval, typical
  1000 ms
• Coding level according to ISO 14119
  Low
• Guard locking monitored
  Yes
Series-wiring
Yes
Tightening torque for the fixing screws, maximum
7 Nm
Note (series connection of the sensors)
Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD
Ambient temperature, maximum
+60 °C
Rated impulse withstand voltage Uimp
0.8 kV
Current consumption with solenoid ON, peak
350 mA / 200 ms
Voltage drop Ud, maximum
4 V
Classification ZVEI CB24I, Source
C2
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Short circuit detection
Yes
Mechanical life, minimum
1,000,000 Operations
Type of the fixing screws
2x M6
Length of sensor
120 mm
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Degree of pollution to IEC/EN 60664-1
3
Test pulse interval, minimum
100 ms
Versions
short-circuit proof, p-type
Current, Utilisation category DC13
0.05 A
Time to readiness, maximum
5,000 ms
Response time safety outputs in case of switch-off by safety inputs, maximum
1.5 ms
Integral System Diagnostics, status
Yes
Ensured switch distance ON Sao
1 mm
Ambient temperature, minimum
+0 °C
Protection rating
III
No-load supply current I0
100 mA
Classification ZVEI CB24I, Sink
C1, C2
general information
Universal coding
Response time safety outputs in case of switch-off by actuator, maximum
100 ms
Angular offset between interlocking device and actuator, maximum
2 °
Switch distance
2 mm
Ensured switch distance OFF Sar
20 mm
Relative humidity, maximum
93 %
Notes (Power supply, general)
stabilised PELV power supply
Test pulse duration, maximum
0.5 ms
Transmit power, maximum
-6 dB/m
Short-circuit recognition
Yes
Safety functions
Yes
Latching force, adjustable, position 1
25 N
Width of sensor
87.5 mm
Storage and transport temperature, minimum
-10 °C
Zulässige Aufstellhöhe über NN, maximum
2,000 m
Overvoltage category
III
Switching frequency, maximum
0.5 Hz
Current, Utilisation category DC12
0.05 A
Frequency band RFID
125 kHz
Latching
Yes
Clamping force in accordance with ISO14119 Fzh
1,150 N
Tightening torque of the fixing screws, minimum
6 Nm
Degree of protection
IP66 to EN 60529, IP67 to EN 60529, IP69 to EN 60529
Restistance to shock
30 g / 11 ms
Current consumption with solenoid ON, average
200 mA
Current consumption at 24V
5 mA
Voltage, Utilisation category DC13
24 VDC
Current leakage Ir
0.5 mA
Standards
IEC 61508, IEC 60947-5-3, EN ISO 13849-1
Operating voltage, minimum
20.4 VDC
Switching thresholds
−3 V … 5 V (Low), 15 V … 30 V (High)
Number of fail-safe digital outputs
2
Duration of risk, maximum
200 ms
Note (length of the sensor chain)
Cable length and cross-section change the voltage drop dependiing on the output current
Note (Relative humidity)
non-condensing, non-icing

AZM300Z-ST-1P2P-A Related Documents