AZM40B-I1-ST-1P2P-PH Schmersal Safety Switches

Product Details

• Coding level according to ISO 14119
  High
• Short circuit detection
  Yes
• Interlocking principle
  bistable
• Actuating speed, maximum
  0.5 m/s
• Ambient temperature, minimum
  +0 °C
• Rated impulse withstand voltage Uimp
  0.8 kV
• Switching frequency, maximum
  0.3 Hz
• Current, Utilisation category DC13
  0.05 A
• Reaction time, maximum
  100 ms
• Safety functions
  Yes
• Latching force
  40 N
• Height of sensor
  20 mm
• Protection rating
  III
• Note
  Cable length and cable section alter the voltage drop depending on the output current
• Current leakage Ir
  0.5 mA
• Enclosure material
  Glass-fibre, reinforced thermoplastic and light-alloy diecast
• Active principle
  RFID
• Series-wiring
  Yes
• Ensured switch distance OFF Sar
  8 mm
• Ambient temperature, maximum
  +55 °C
Overvoltage category
III
Current consumption solenoid at switching moment, peak
600 mA / 100ms
general information
Individual coding
Standards
IEC 61508, EN 60947-5-3, EN ISO 13849-1
Type of the fixing screws
DESIGN_MOUNTING_SCREWS11111111111111111112
Mechanical life, minimum
200,000 Operations
Storage and transport temperature, maximum
+85 °C
No-load supply current I0
100 mA
Rated operating current (safety outputs)
250 mA
Gross weight
305.9 g
Integral System Diagnostics, status
Yes
Actuator monitored
Yes
Ensured switch distance ON Sao
1 mm
Degree of protection
IP66 to EN 60529, IP67 to EN 60529
Rated insulation voltage Ui
32 VDC
Required rated short-circuit current to EN 60947-5-1
100 A
Latching
Yes
Duration of risk, maximum
200 ms
Clamping force in accordance with ISO14119 Fzh
2,000 N
Length of sensor
119.5 mm
Resistance to vibrations to EN 60068-2-6
10 … 55 Hz, amplitude 1 mm
Degree of pollution to VDE 0100
3
Versions
short-circuit proof, p-type
Time to readiness, maximum
4,000 ms
Short-circuit recognition
Yes
Clamping force, maximum Fmax
2,600 N
Terminal Connector
Connector M12, 8-pole, A-coded
Restistance to shock
30 g / 11 ms
Rated operating voltage
24 VDC - 15 % / + 10 % (stabilised PELV)
Switching thresholds
−3 V … 5 V (Low), 15 V … 30 V (High)
Response time safety outputs in case of switch-off by safety inputs, maximum
1.5 ms
Manual release
Yes
Number of safety contacts
2
Width of sensor
40 mm
Storage and transport temperature, minimum
-40 °C
Operating current
1,200 mA
Classification ZVEI CB24I, Source
C2
Current consumption at 24V
15 mA
Voltage drop Ud, maximum
2 V
Classification ZVEI CB24I, Sink
C1, C2
Voltage, Utilisation category DC12
24 VDC
Voltage, Utilisation category DC13
24 VDC
Current, Utilisation category DC12
0.05 A

AZM40B-I1-ST-1P2P-PH Related Documents