MV8H 017-22Y Schmersal Electronic Components

Product Details

• Slide form
  Castor
• Roller material
  Plastic
• Cable section, minimum
  1.5 mm²
• Actuating speed, minimum
  1 mm/min
• Diameter of Castor
  20 mm
• Bounce duration, maximum
  2.5 ms
• Actuating angle, from left of switch axis
  30 °
• Number of openers
  2
• Cable section, maximum
  2.5 mm²
• Utilisation category AC-15
  2.5 A
• Active principle
  mechanical
• Mechanical life, minimum
  5,000,000 Operations
• Note (Cable section)
  All indications about the cable section are including the conductor ferrules.
• Width of sensor
  67 mm
• Thermal test current
  10 A
• Material of the contacts, electrical
  Silver
• Actuating angle, from right of switch axis
  30 °
• Wire cross-section
  13 AWG
• Degree of protection
  IP65 to EN 60529
• Switching principle
  Snap switch element
Actuating element
Roller lever
Enclosure coating material
painted
Actuating torque
0.2 Nm
Ambient temperature, minimum
-30 °C
Switchover time, maximum
40 ms
Number of shutters
2
Standards
EN 60947-5-1
Enclosure material
Light-alloy diecast, paint finish
Gross weight
445 g
Contact opening
2 x 1.2 mm
Actuating speed, maximum
3 m/s
Note (Actuating speed)
Actuating speed with vertical actuating angle to switch axis
Terminal Connector
Screw connection
Length of sensor
43 mm
Height of sensor
181 mm
Rated insulation voltage Ui
500 V
Width of Castor
8.5 mm
Switching element
NO contact, NC contact
Note (Switching element)
galvanically separated contact bridges
Ambient temperature, maximum
+90 °C

MV8H 017-22Y Related Documents