MV8H 330-11Y-A-1366 Schmersal Electronic Components

Product Details

• Gross weight
  275 g
• Wire cross-section
  13 AWG
• Rated insulation voltage Ui
  250 V
• Switchover time, maximum
  10 ms
• Active principle
  mechanical
• Enclosure coating material
  painted
• Note (Cable section)
  All indications about the cable section are including the conductor ferrules.
• Diameter of Castor
  20 mm
• Note (Switching element)
  galvanically separated contact bridges
• Number of openers
  1
• Repeat accuracy of switching points
  0.02
• Width of sensor
  40 mm
• Restistance to shock
  50 g / 6 ms
• Switching element
  NO contact, NC contact
• Number of shutters
  1
• Enclosure material
  Light-alloy diecast, paint finish
• Actuating speed, minimum
  1 mm/min
• Ambient temperature, minimum
  -30 °C
• Material of the contacts, electrical
  Silver
• Terminal Connector
  Screw connection
Width of Castor
8.5 mm
Utilisation category AC-15
2.5 A
Slide form
Castor
Contact opening
2 x 0.5 mm
Length of sensor
40 mm
Degree of protection
IP65 to EN 60529
Thermal test current
6 A
Standards
EN 60947-5-1
Actuating torque
0.5 Nm
Height of sensor
129.5 mm
Rated impulse withstand voltage Uimp
4 kV
Bounce duration, maximum
43,221 ms
Roller material
Metal film
Actuating element
Roller lever
Cable section, maximum
2.5 mm²
Ambient temperature, maximum
+160 °C
Switching principle
Snap switch element

MV8H 330-11Y-A-1366 Related Documents