AZM300B-I2-ST-SD2P Schmersal Safety Switches

Product Details

• Switch distance
  2 mm
• Coding level according to ISO 14119
  High
• Standards
  IEC 61508, IEC 60947-5-3, EN ISO 13849-1
• Short-circuit recognition
  Yes
• Width of sensor
  87.5 mm
• Restistance to shock
  30 g / 11 ms
• Notes (Power supply, general)
  stabilised PELV power supply
• Current, Utilisation category DC12
  0.05 A
• Voltage, Utilisation category DC13
  24 VDC
• Tightening torque for the fixing screws, maximum
  7 Nm
• Length of sensor
  120 mm
• Frequency band RFID
  125 kHz
• Manual release
  Yes
• Note (Mechanical lifetime)
  When using as door stop: ≥ 50.000 operations (door mass ≤ 5 kg and actuating speed ≤ 0.5 m/s)
• Resistance to vibrations to EN 60068-2-6
  10 … 150 Hz, amplitude 0.35 mm
• Operating voltage, maximum
  26.4 VDC
• Classification ZVEI CB24I, Source
  C2
• Duration of risk, maximum
  200 ms
• Power to unlock
  Yes
• Clamping force in accordance with ISO14119 Fzh
  1,150 N
Tightening torque of the fixing screws, minimum
6 Nm
Ambient temperature, maximum
+60 °C
Zulässige Aufstellhöhe über NN, maximum
2,000 m
No-load supply current I0
100 mA
Switching frequency, maximum
0.5 Hz
Voltage drop Ud, maximum
4 V
general information
Individual coding, multiple teaching
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Safety functions
Yes
Latching force, adjustable, position 2
50 N
Note (length of the sensor chain)
Cable length and cross-section change the voltage drop dependiing on the output current
Degree of protection
IP66 to EN 60529, IP67 to EN 60529, IP69 to EN 60529
Operating voltage, minimum
20.4 VDC
Current consumption with solenoid ON, average
200 mA
Test pulse interval, minimum
100 ms
Test pulse interval, typical
1000 ms
Gross weight
550 g
Time to readiness, maximum
5,000 ms
Short circuit detection
Yes
Ensured switch distance ON Sao
1 mm
Height of sensor
35 mm
Overvoltage category
III
Current leakage Ir
0.5 mA
Active principle
RFID
Response time safety outputs in case of switch-off by safety inputs, maximum
1.5 ms
Number of fail-safe digital outputs
2
Type of the fixing screws
2x M6
Note (series connection of the sensors)
Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD
Ambient temperature, minimum
+0 °C
Rated impulse withstand voltage Uimp
0.8 kV
Current consumption with solenoid ON, peak
350 mA / 200 ms
Current consumption at 24V
5 mA
Transmit power, maximum
-6 dB/m
Response time safety outputs in case of switch-off by actuator, maximum
100 ms
Integral System Diagnostics, status
Yes
Ensured switch distance OFF Sar
20 mm
Storage and transport temperature, minimum
-10 °C
Protection rating
III
Required rated short-circuit current to EN 60947-5-1
100 A
Operation current
150 mA
Actuator monitored
Yes
Series-wiring
Yes
Mechanical life, minimum
1,000,000 Operations
Latching force, adjustable, position 1
25 N
Terminal Connector
Connector M12, 8-pole, A-coded
Storage and transport temperature, maximum
+90 °C
Note (Relative humidity)
non-condensing, non-icing
Degree of pollution to IEC/EN 60664-1
3
Duty cycle solenoid
100 %
Test pulse duration, maximum
0.5 ms
Serial diagnostics
Yes
Latching
Yes
Angular offset between interlocking device and actuator, maximum
2 °
Clamping force, maximum Fmax
1,500 N
Length of sensor chain, maximum
200 m
Relative humidity, maximum
93 %
Rated insulation voltage Ui
32 VDC
External wiring and device fuse rating
2 A gG
Switching thresholds
−3 V … 5 V (Low), 15 V … 30 V (High)
Versions
short-circuit proof, p-type
Voltage, Utilisation category DC12
24 VDC
Classification ZVEI CB24I, Sink
C1, C2
Current, Utilisation category DC13
0.05 A
Wiring capacity
50 nF

AZM300B-I2-ST-SD2P Related Documents