AZM300B-ST-AS-A-P Schmersal Safety Switch Interlocks

Product Details

• Enclosure material
  Glass-fibre, reinforced thermoplastic
• Integral System Diagnostics, status
  Yes
• Switch distance
  2 mm
• Rated insulation voltage Ui
  32 VDC
• AS-i Profile
  S-7.B.F.E
• AS-i Version
  V 3.0
• Rated operating voltage
  24 VDC -15% / +10% (stabilised PELV)
• Standards
  IEC 61508, EN 60947-5-1, EN ISO 14119
• Power to lock
  Yes
• Latching force, adjustable, position 1
  25 N
• Ambient temperature, maximum
  +60 °C
• Protection rating
  II
• AS-i Input, Channel 1
  Data bits DI 0 / DI 1 = dynamic code transmission
• AS-i Parameter bits, P0
  Safety guard closed and can be locked
• Time to readiness, maximum
  5,000 ms
• Number of actuating directions
  3
• Ensured switch distance ON Sao
  1 mm
• Ambient temperature, minimum
  +0 °C
• Storage and transport temperature, maximum
  +90 °C
• AS-i Specification
  Safety-Slave
AS-i Outputs, DO 1
No Function
Operating current
300 mA
Gross weight
595 g
Coding level according to ISO 14119
Low
Duration of risk, maximum
200 ms
Clamping force
1,150 N
Note (Mechanical lifetime)
When using as door stop: ≥ 50.000 operations (door mass ≤ 5 kg and actuating speed ≤ 0.5 m/s)
Ensured switch distance OFF Sar
20 mm
Terminal Connector
Connector plug M12, 4-pole, (A-coding)
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Restistance to shock
30 g / 11 ms
Degree of pollution to VDE 0100
3
AS-i Operating voltage, minimum
18 VDC
AS-i Outputs, DO 0
Solenoid control
AS-i Outputs, DO 2
No Function
AS-i Parameter bits, P2
Auxiliary voltage in
Reaction time, maximum
120 ms
Safety functions
Yes
Mechanical life, minimum
1,000,000 Operations
Width of sensor
87.4 mm
Storage and transport temperature, minimum
-10 °C
AS-i Current consumption, maximum
100 mA
AS-i Parameter bits, P1
Solenoid interlock locked
Active principle
RFID
Actuator monitored
Yes
Latching force, adjustable, position 2
50 N
Degree of protection
IP66 to EN 60529, IP67 to EN 60529, IP69K to DIN 40050-9
Overvoltage category
III
Note (AS-i Operating voltage)
Protection against polarity reversal
AS-i Parameter bits, P3
Internal device error (FID)
general information
Universal coding
Manual release
Yes
Latching
Yes
Length of sensor
34.4 mm
Height of sensor
102.6 mm
AS-i Operating voltage AS-i maximum
31.6 VDC
Rated impulse withstand voltage Uimp
0.8 kV
AS-i Input, Channel 2
Data bits DI 2 / DI 3 = dynamic code transmission
AS-i Outputs, DO 3
No Function
AS-i Input module address
0
Note (AS-i Input module address)
Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
Note (AS-i Parameter bits)
Set the parameter outputs to "1111" (0xF), FID: periphery error

AZM300B-ST-AS-A-P Related Documents