AZM300B-ST-SD2P-A Schmersal Safety Switches

Product Details

• Duration of risk, maximum
  200 ms
• Response time safety outputs in case of switch-off by safety inputs, maximum
  1.5 ms
• Integral System Diagnostics, status
  Yes
• Tightening torque of the fixing screws, minimum
  6 Nm
• Length of sensor
  120 mm
• Restistance to shock
  30 g / 11 ms
• Operating voltage, maximum
  26.4 VDC
• Classification ZVEI CB24I, Sink
  C1, C2
• Voltage, Utilisation category DC12
  24 VDC
• general information
  Universal coding
• Actuator monitored
  Yes
• Latching
  Yes
• Latching force, adjustable, position 1
  25 N
• Type of the fixing screws
  2x M6
• Degree of protection
  IP66 to EN 60529, IP67 to EN 60529, IP69 to EN 60529
• Note (Relative humidity)
  non-condensing, non-icing
• Degree of pollution to IEC/EN 60664-1
  3
• External wiring and device fuse rating
  2 A gG
• Voltage drop Ud, maximum
  4 V
• Frequency band RFID
  125 kHz
Serial diagnostics
Yes
Clamping force, maximum Fmax
1,500 N
Length of sensor chain, maximum
200 m
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Storage and transport temperature, maximum
+90 °C
Current consumption with solenoid ON, peak
350 mA / 200 ms
Current leakage Ir
0.5 mA
Time to readiness, maximum
5,000 ms
Short circuit detection
Yes
Short-circuit recognition
Yes
Number of fail-safe digital outputs
2
Ensured switch distance OFF Sar
20 mm
Storage and transport temperature, minimum
-10 °C
Rated impulse withstand voltage Uimp
0.8 kV
Switching frequency, maximum
0.5 Hz
Test pulse interval, minimum
100 ms
Voltage, Utilisation category DC13
24 VDC
Operation current
150 mA
Coding level according to ISO 14119
Low
Power to lock
Yes
Mechanical life, minimum
1,000,000 Operations
Latching force, adjustable, position 2
50 N
Note (length of the sensor chain)
Cable length and cross-section change the voltage drop dependiing on the output current
Ambient temperature, maximum
+60 °C
Rated insulation voltage Ui
32 VDC
Required rated short-circuit current to EN 60947-5-1
100 A
Test pulse duration, maximum
0.5 ms
Current, Utilisation category DC12
0.05 A
Wiring capacity
50 nF
Gross weight
600 g
Active principle
RFID
Safety functions
Yes
Angular offset between interlocking device and actuator, maximum
2 °
Tightening torque for the fixing screws, maximum
7 Nm
Ambient temperature, minimum
+0 °C
Zulässige Aufstellhöhe über NN, maximum
2,000 m
No-load supply current I0
100 mA
Classification ZVEI CB24I, Source
C2
Current, Utilisation category DC13
0.05 A
Standards
IEC 61508, IEC 60947-5-3, EN ISO 13849-1
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Clamping force in accordance with ISO14119 Fzh
1,150 N
Ensured switch distance ON Sao
1 mm
Note (series connection of the sensors)
Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD
Relative humidity, maximum
93 %
Operating voltage, minimum
20.4 VDC
Duty cycle solenoid
100 %
Test pulse interval, typical
1000 ms
Transmit power, maximum
-6 dB/m
Response time safety outputs in case of switch-off by actuator, maximum
100 ms
Manual release
Yes
Note (Mechanical lifetime)
When using as door stop: ≥ 50.000 operations (door mass ≤ 5 kg and actuating speed ≤ 0.5 m/s)
Terminal Connector
Connector M12, 8-pole, A-coded
Width of sensor
87.5 mm
Overvoltage category
III
Current consumption with solenoid ON, average
200 mA
Current consumption at 24V
5 mA
Versions
short-circuit proof, p-type
Series-wiring
Yes
Switch distance
2 mm
Height of sensor
35 mm
Protection rating
III
Notes (Power supply, general)
stabilised PELV power supply
Switching thresholds
−3 V … 5 V (Low), 15 V … 30 V (High)

AZM300B-ST-SD2P-A Related Documents