AZM300B-ST-SD2P Schmersal Safety Switch Interlocks

Product Details

• Coding level according to ISO 14119
  Low
• Transmit power, maximum
  -6 dB/m
• general information
  Universal coding
• Enclosure material
  Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
• Frequency band RFID
  125 kHz
• Duration of risk, maximum
  200 ms
• Standards
  IEC 61508, IEC 60947-5-3, EN ISO 13849-1
• Active principle
  RFID
• Gross weight
  550 g
• Time to readiness, maximum
  5,000 ms
• Response time safety outputs in case of switch-off by actuator, maximum
  100 ms
• Response time safety outputs in case of switch-off by safety inputs, maximum
  1.5 ms
• Serial diagnostics
  Yes
• Short-circuit recognition
  Yes
• Power to unlock
  Yes
• Actuator monitored
  Yes
• Latching
  Yes
• Manual release
  Yes
• Short circuit detection
  Yes
• Series-wiring
  Yes
Clamping force, maximum Fmax
1,500 N
Note (length of the sensor chain)
Cable length and cross-section change the voltage drop dependiing on the output current
Height of sensor
35 mm
Restistance to shock
30 g / 11 ms
Operating voltage, minimum
20.4 VDC
Required rated short-circuit current to EN 60947-5-1
100 A
Classification ZVEI CB24I, Source
C2
Voltage drop Ud, maximum
4 V
Wiring capacity
50 nF
Integral System Diagnostics, status
Yes
Latching force, adjustable, position 2
50 N
Length of sensor chain, maximum
200 m
Width of sensor
87.5 mm
Note (Relative humidity)
non-condensing, non-icing
Degree of pollution to IEC/EN 60664-1
3
Current consumption with solenoid ON, average
200 mA
Current leakage Ir
0.5 mA
Test pulse interval, typical
1000 ms
Classification ZVEI CB24I, Sink
C1, C2
Safety functions
Yes
Switch distance
2 mm
Storage and transport temperature, maximum
+90 °C
Notes (Power supply, general)
stabilised PELV power supply
Test pulse duration, maximum
0.5 ms
Mechanical life, minimum
1,000,000 Operations
Type of the fixing screws
2x M6
Note (series connection of the sensors)
Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD
Degree of protection
IP66 to EN 60529, IP67 to EN 60529, IP69 to EN 60529
Protection rating
III
Operating voltage, maximum
26.4 VDC
Current consumption with solenoid ON, peak
350 mA / 200 ms
Versions
short-circuit proof, p-type
Note (Mechanical lifetime)
When using as door stop: ≥ 50.000 operations (door mass ≤ 5 kg and actuating speed ≤ 0.5 m/s)
Tightening torque of the fixing screws, minimum
6 Nm
Ambient temperature, minimum
+0 °C
Zulässige Aufstellhöhe über NN, maximum
2,000 m
External wiring and device fuse rating
2 A gG
Operation current
150 mA
Current, Utilisation category DC13
0.05 A
Number of fail-safe digital outputs
2
Tightening torque for the fixing screws, maximum
7 Nm
Length of sensor
120 mm
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Duty cycle solenoid
100 %
Voltage, Utilisation category DC13
24 VDC
Clamping force in accordance with ISO14119 Fzh
1,150 N
Terminal Connector
Connector M12, 8-pole, A-coded
Storage and transport temperature, minimum
-10 °C
Overvoltage category
III
Switching thresholds
−3 V … 5 V (Low), 15 V … 30 V (High)
Current consumption at 24V
5 mA
Angular offset between interlocking device and actuator, maximum
2 °
Ensured switch distance ON Sao
1 mm
Ambient temperature, maximum
+60 °C
Rated insulation voltage Ui
32 VDC
No-load supply current I0
100 mA
Test pulse interval, minimum
100 ms
Current, Utilisation category DC12
0.05 A
Latching force, adjustable, position 1
25 N
Ensured switch distance OFF Sar
20 mm
Relative humidity, maximum
93 %
Rated impulse withstand voltage Uimp
0.8 kV
Switching frequency, maximum
0.5 Hz
Voltage, Utilisation category DC12
24 VDC

AZM300B-ST-SD2P Related Documents