AZM300Z-I1-ST-1P2P-A-T Schmersal Safety Switch Interlocks

Product Details

• Transmit power, maximum
  -6 dB/m
• Response time safety outputs in case of switch-off by safety inputs, maximum
  1.5 ms
• Integral System Diagnostics, status
  Yes
• Tightening torque of the fixing screws, minimum
  6 Nm
• Length of sensor
  146 mm
• Zulässige Aufstellhöhe über NN, maximum
  2,000 m
• External wiring and device fuse rating
  2 A gG
• Versions
  short-circuit proof, p-type
• Standards
  EN ISO 13849-1, EN ISO 14119, IEC 60947-5-3
• Duration of risk, maximum
  200 ms
• Number of fail-safe digital outputs
  2
• Switch distance
  2 mm
• Storage and transport temperature, minimum
  -10 °C
• Rated impulse withstand voltage Uimp
  0.8 kV
• Test pulse interval, minimum
  100 ms
• Current, Utilisation category DC13
  0.05 A
• Coding level according to ISO 14119
  High
• Guard locking monitored
  Yes
• Series-wiring
  Yes
• Clamping force in accordance with ISO14119 Fzh
  1,150 N
Ensured switch distance OFF Sar
20 mm
Width of sensor
87.5 mm
Relative humidity, maximum
93 %
Overvoltage category
III
Current consumption with solenoid ON, peak
350 mA / 200 ms
Current leakage Ir
0.5 mA
Classification ZVEI CB24I, Source
C2
Gross weight
639.5 g
Emergency exit
Yes
Short-circuit recognition
Yes
Latching force, adjustable, position 2
50 N
Length of sensor chain, maximum
200 m
Ambient temperature, maximum
+60 °C
Rated insulation voltage Ui
32 VDC
Operating voltage, maximum
26.4 VDC
Switching thresholds
−3 V … 5 V (Low), 15 V … 30 V (High)
Voltage drop Ud, maximum
4 V
Frequency band RFID
125 kHz
Active principle
RFID
Mechanical life, minimum
1,000,000 Operations
Type of the fixing screws
2x M6
Ambient temperature, minimum
+0 °C
Restistance to shock
30 g / 11 ms
No-load supply current I0
100 mA
Test pulse duration, maximum
0.5 ms
Time to readiness, maximum
5,000 ms
Short circuit detection
Yes
Latching force, adjustable, position 1
25 N
Note (length of the sensor chain)
Cable length and cross-section change the voltage drop dependiing on the output current
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Notes (Power supply, general)
stabilised PELV power supply
Current consumption at 24V
5 mA
Current, Utilisation category DC12
0.05 A
general information
Individual coding
Response time safety outputs in case of switch-off by actuator, maximum
100 ms
Note (Mechanical lifetime)
When using as door stop: ≥ 50.000 operations (door mass ≤ 5 kg and actuating speed ≤ 0.5 m/s)
Tightening torque for the fixing screws, maximum
7 Nm
Terminal Connector
Connector M12, 8-pole, A-coded
Degree of protection
IP66 to EN 60529, IP67 to EN 60529, IP69 to EN 60529
Protection rating
III
Operating voltage, minimum
20.4 VDC
Switching frequency, maximum
0.5 Hz
Voltage, Utilisation category DC13
24 VDC
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Power to lock
Yes
Clamping force, maximum Fmax
1,500 N
Height of sensor
55 mm
Note (Relative humidity)
non-condensing, non-icing
Required rated short-circuit current to EN 60947-5-1
100 A
Classification ZVEI CB24I, Sink
C1, C2
Voltage, Utilisation category DC12
24 VDC
Safety functions
Yes
Latching
Yes
Angular offset between interlocking device and actuator, maximum
2 °
Ensured switch distance ON Sao
1 mm
Note (series connection of the sensors)
Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD
Storage and transport temperature, maximum
+90 °C
Degree of pollution to IEC/EN 60664-1
3
Current consumption with solenoid ON, average
200 mA
Duty cycle solenoid
100 %
Test pulse interval, typical
1000 ms

AZM300Z-I1-ST-1P2P-A-T Related Documents