AZM300Z-I2-ST-1P2P-N Schmersal Safety Switches

Product Details

• Duration of risk, maximum
  200 ms
• Gross weight
  610 g
• Active principle
  RFID
• Frequency band RFID
  125 kHz
• Response time safety outputs in case of switch-off by actuator, maximum
  100 ms
• Power to unlock
  Yes
• Time to readiness, maximum
  5,000 ms
• Guard locking monitored
  Yes
• Type of the fixing screws
  2x M6
• Switch distance
  2 mm
• Width of sensor
  87.5 mm
• Storage and transport temperature, maximum
  +90 °C
• Resistance to vibrations to EN 60068-2-6
  10 … 150 Hz, amplitude 0.35 mm
• Current consumption with solenoid ON, average
  200 mA
• Switching frequency, maximum
  0.5 Hz
• Test pulse interval, minimum
  40 ms
• Voltage drop Ud, maximum
  4 V
• Tightening torque for the fixing screws, maximum
  7 Nm
• Note (length of the sensor chain)
  Cable length and cross-section change the voltage drop dependiing on the output current
• Degree of protection
  IP66 to EN 60529, IP67 to EN 60529, IP69 to EN 60529
Rated insulation voltage Ui
32 VDC
No-load supply current I0
100 mA
Duty cycle solenoid
100 %
Current leakage Ir
0.5 mA
Test pulse interval, typical
1000 ms
Classification ZVEI CB24I, Source
C2
Latching force, adjustable, position 2
50 N
Note (series connection of the sensors)
Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD
Ambient temperature, maximum
+60 °C
Rated impulse withstand voltage Uimp
0.8 kV
Notes (Power supply, general)
stabilised PELV power supply
Switching thresholds
−3 V … 5 V (Low), 15 V … 30 V (High)
Versions
short-circuit proof, p-type
Tightening torque of the fixing screws, minimum
6 Nm
Length of sensor chain, maximum
200 m
Storage and transport temperature, minimum
-10 °C
Note (Relative humidity)
non-condensing, non-icing
Operating voltage, maximum
26.4 VDC
Degree of pollution to IEC/EN 60664-1
3
Current, Utilisation category DC13
0.05 A
Ensured switch distance ON Sao
1 mm
Length of sensor
146 mm
Height of sensor
55 mm
Protection rating
III
Operating voltage, minimum
20.4 VDC
Test pulse duration, maximum
0.5 ms
Voltage, Utilisation category DC13
24 VDC
Ensured switch distance OFF Sar
20 mm
Ambient temperature, minimum
+0 °C
Zulässige Aufstellhöhe über NN, maximum
2,000 m
Overvoltage category
III
Current consumption with solenoid ON, peak
350 mA / 200 ms
Current consumption at 24V
5 mA
Classification ZVEI CB24I, Sink
C1, C2
Voltage, Utilisation category DC12
24 VDC
Terminal Connector
Connector M12, 8-pole, A-coded
Relative humidity, maximum
93 %
Restistance to shock
30 g / 11 ms
Required rated short-circuit current to EN 60947-5-1
100 A
External wiring and device fuse rating
2 A gG
Current, Utilisation category DC12
0.05 A
Response time safety outputs in case of switch-off by safety inputs, maximum
1.5 ms
Mechanical life, minimum
1,000,000 Operations
Latching force, adjustable, position 1
25 N
general information
Individual coding, multiple teaching
Short-circuit recognition
Yes
Standards
IEC 61508, IEC 60947-5-3, EN ISO 13849-1
Coding level according to ISO 14119
High
Clamping force, maximum Fmax
1,500 N
Latching
Yes
Number of fail-safe digital outputs
2
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Emergency release
Yes
Transmit power, maximum
-6 dB/m
Short circuit detection
Yes
Note (Mechanical lifetime)
When using as door stop: ≥ 50.000 operations (door mass ≤ 5 kg and actuating speed ≤ 0.5 m/s)
Series-wiring
Yes
Clamping force in accordance with ISO14119 Fzh
1,150 N
Integral System Diagnostics, status
Yes
Safety functions
Yes
Angular offset between interlocking device and actuator, maximum
2 °

AZM300Z-I2-ST-1P2P-N Related Documents