SRB201ZHX3 24VDC Schmersal Electronic Components

Product Details

• Gross weight
  220 g
• Material of the contacts, electrical
  AgSn0. self-cleaning, positive drive
• Mechanical life, minimum
  10,000,000 Operations
• Degree of protection of the mounting space
  IP54
• Storage and transport temperature, maximum
  +85 °C
• Rated operating voltage
  24 VAC -15% / +10%, 24 VDC -15% / +20%, residual ripple max. 10 %
• Rated control voltage at DC, maximum
  28.8 VDC
• Pull-in delay at RESET, typically
  20 ms
• Feedback circuit
  Yes
• Number of auxiliary contacts
  1
• Mounting
  Snaps onto standard DIN rail to EN 60715
• Ambient temperature, minimum
  -25 °C
• Resistance to vibrations to EN 60068-2-6
  10...55 Hz, Amplitude 0.35 mm, ± 15 %
• Rated control voltage at AC 50 Hz, maximum
  26.4 VAC
• Note (Contact resistance)
  in new state
• Pull-in delay at automatic start, maximum, typically
  100 ms
• Conduction resistance, maximum
  40 Ω
• Short-circuit recognition
  Yes
• Climatic stress
  EN 60068-2-78
• Number of openers
  2
Height
100 mm
Width
22.5 mm
Restistance to shock
30 g / 11 ms
Rated control voltage at AC 60 Hz, maximum
26.4 VAC
Voltage, Utilisation category DC13
24 VDC
Electronic Fuse
Yes
Standards
IEC 61508, IEC/EN 60204-1, EN 60947-5-1
Cable section, minimum
0.25 mm²
Degree of protection of the enclosure
IP40
Frequency range
50 Hz, 60 Hz
Drop-out delay in case of emergency, typically
20 ms
Switching capacity, maximum
2 A
Wire breakage detection
Yes
Number of LEDs
3
Terminal Connector
Screw connection, rigid or flexible
Degree of protection of clips or terminals
IP20
Rated AC voltage for controls, 50 Hz, minimum
20.4 VAC
Contact resistance, maximum
0.1 Ω
Current, Utilisation category DC13
6 A
Stop-Category
0
Integral System Diagnostics, status
Yes
Terminal designations
IEC/EN 60947-1
Ambient temperature, maximum
+60 °C
Degree of pollution to IEC/EN 60664-1
2
Electrical power consumption
1.5 W
Voltage, Utilisation category AC15
230 VAC
Automatic reset function
Yes
Number of safety contacts
2
Depth
121 mm
Storage and transport temperature, minimum
-40 °C
Overvoltage category
III
Rated AC voltage for controls at DC minimum
20.4 VDC
Current, Utilisation category AC-15
6 A
EMC rating
EMC-Directive
Cable section, maximum
2.5 mm²
Enclosure material
Glass-fibre reinforced thermoplastic, ventilated
Rated AC voltage for controls, 60 Hz, minimum
20.4 VAC
Drop-out delay in case of power failure, typically
80 ms
Tightening torque of Clips
0.6 Nm
Earth connection detection
Yes
Rated impulse withstand voltage Uimp
4 kV
Switching capacity, minimum
10 mA
Number of shutters
2

SRB201ZHX3 24VDC Related Documents