SRB202MSK Schmersal Electronic Components

Product Details

• Integral System Diagnostics, status
  Yes
• Terminal Connector
  Screw connection, rigid or flexible
• Degree of protection of the enclosure
  IP40
• Restistance to shock
  30 g / 11 ms
• Note (Contact resistance)
  in new state
• Stop-Category
  0
• Enclosure material
  Glass-fibre reinforced thermoplastic, ventilated
• Number of safety contacts
  2
• Cable section, maximum
  2.5 mm²
• Width
  45 mm
• Ambient temperature, maximum
  +45 °C
• Rated control voltage at DC, maximum
  28.8 VDC
• Rated AC voltage for controls at DC minimum
  20.4 VDC
• Drop-out delay in case of emergency stop, maximum
  20 ms
• Conduction resistance, maximum
  40 Ω
• Earth connection detection
  Yes
• Material of the contacts, electrical
  AgSn0, Ag-Ni, self-cleaning, positive drive
• Wire breakage detection
  Yes
• Number of signalling outputs
  2
• Number of LEDs
  8
Terminal designations
IEC/EN 60947-1
Depth
121 mm
Degree of protection of clips or terminals
IP20
Gross weight
330 g
Feedback circuit
Yes
Mechanical life, minimum
10,000,000 Operations
Height
100 mm
Storage and transport temperature, maximum
+85 °C
Rated operating voltage
24 VDC -15%/+20%, residual ripple max. 10%
Electrical power consumption
3.1 W
Utilisation category DC-13
2 A
EMC rating
EMC-Directive
Climatic stress
EN 60068-2-78
Standards
IEC 61508, IEC/EN 60204-1, EN 60947-5-1
Number of auxiliary contacts
2
Mounting
Snaps onto standard DIN rail to EN 60715
Storage and transport temperature, minimum
-40 °C
Removable Terminals
Yes
Number of inputs for NC
2
Tightening torque of Clips
0.6 Nm
Ambient temperature, minimum
-25 °C
Overvoltage category
III
Resistance to vibrations to EN 60068-2-6
10...55 Hz, Amplitude 0.35 mm, ± 15 %
Automatic reset function
Yes
Electronic Fuse
Yes
Cable section, minimum
0.25 mm²
Degree of protection of the mounting space
IP54
Rated impulse withstand voltage Uimp
4 kV
Degree of pollution to IEC/EN 60664-1
2
Pull-in delay at automatic start, maximum, typically
200 ms
Contact resistance, maximum
0.1 Ω
Drop-out delay in case of power failure, typically
60 ms

SRB202MSK Related Documents