SRB220XV2 / V.2 Schmersal Electronic Components

Product Details

• Stop-Category
  0, 1
• Integral System Diagnostics, status
  Yes
• Mounting
  Snaps onto standard DIN rail to EN 60715
• Degree of protection of the enclosure
  IP40
• Overvoltage category
  III
• Rated control voltage at DC, maximum
  28.8 VDC
• Enclosure material
  Glass-fibre reinforced thermoplastic, ventilated
• Number of openers
  2
• Electronic Fuse
  Yes
• Terminal designations
  IEC/EN 60947-1
• Short-circuit recognition
  Yes
• Earth connection detection
  Yes
• Number of Safety contacts, STOP 1
  2
• Height
  100 mm
• Rated impulse withstand voltage Uimp
  4 kV
• Standards
  IEC 61508, IEC/EN 60204-1, EN 60947-5-1
• Reset edge detection
  Yes
• Terminal Connector
  Screw connection, rigid or flexible
• Degree of protection of clips or terminals
  IP20
• Degree of pollution to VDE 0110
  2
Voltage, Utilisation category, DC13
24 VDC
Voltage, Utilisation category DC12
24 VDC
Wire breakage detection
Yes
Automatic reset function
Yes
Mechanical life, minimum
10,000,000 Operations
Width
45 mm
Resistance to vibrations to EN 60068-2-6
10...55 Hz, Amplitude 0.35 mm, ± 15 %
Rated AC voltage for controls, 50 Hz, minimum
20.4 VAC
Note (Contact resistance)
in new state
Gross weight
420 g
Number of LEDs
5
Cable section, minimum
0.25 mm²
Storage and transport temperature, minimum
-40 °C
Depth
121 mm
Rated operating voltage
24 VAC -15% / +10%, 24 VDC -15% / +20%, residual ripple max. 10 %
Voltage, Utilisation category, AC15
230 VAC
Current, Utilisation category DC12
0.1 A
Degree of protection of the mounting space
IP54
Restistance to shock
30 g / 11 ms
Rated AC voltage for controls at DC minimum
20.4 VDC
Pull-in delay at automatic start, maximum, typically
250 ms
Rated AC voltage for controls, 60 Hz, minimum
20.4 VAC
Drop-out delay in case of emergency, typically
30 ms
Climatic stress
EN 60068-2-78
Start input
Yes
Number of safety contacts
4
Cable section, maximum
2.5 mm²
Ambient temperature, minimum
-25 °C
Storage and transport temperature, maximum
+85 °C
Rated control voltage at AC 50 Hz, maximum
26.4 VAC
Contact resistance, maximum
0.1 Ω
Current, Utilisation category, DC13
2 A
Switching capacity, maximum
6 A
Material of the contacts, electrical
AgSn0, Ag-Ni, self-cleaning, positive drive
Feedback circuit
Yes
Number of Safety contacts, STOP 0
3
Tightening torque of Clips
0.6 Nm
Ambient temperature, maximum
+60 °C
Frequency range
50 Hz, 60 Hz
Switching capacity, minimum
10 mA
Drop-out delay in case of power failure, typically
80 ms
Rated control voltage at AC 60 Hz, maximum
26.4 VAC
Pull-in delay at RESET, typically
20 ms
Conduction resistance, maximum
40 Ω
EMC rating
EMC-Directive
Electrical power consumption
5.4 VA
Current, Utilisation category, AC15
3 A

SRB220XV2 / V.2 Related Documents