SRB207AN 230VAC Schmersal Electronic Components

Product Details

• Short-circuit recognition
  Yes
• Reset edge detection
  Yes
• Number of auxiliary contacts
  1, 7
• Cable section, minimum
  0.25 mm²
• Width
  45 mm
• Degree of pollution to IEC/EN 60664-1
  2
• Gross weight
  400 g
• Climatic stress
  EN 60068-2-78
• Number of Snap-in contacts, minimum
  1
• Cable section, maximum
  2.5 mm²
• Degree of protection of clips or terminals
  IP20
• EMC rating
  EMC-Directive
• Enclosure material
  Glass-fibre reinforced thermoplastic, ventilated
• Start input
  Yes
• Number of LEDs
  3
• Degree of protection of the enclosure
  IP40
• Storage and transport temperature, maximum
  +85 °C
• Overvoltage category
  III
• Material of the contacts, electrical
  AgSn0. self-cleaning, positive drive
• Automatic reset function
  Yes
Terminal Connector
Screw connection, rigid or flexible
Tightening torque of Clips
0.6 Nm
Ambient temperature, minimum
-25 °C
Restistance to shock
30 g / 11 ms
Standards
IEC 61508, IEC/EN 60204-1, EN 60947-5-1
Electronic Fuse
Yes
Mechanical life, minimum
10,000,000 Operations
Terminal designations
IEC/EN 60947-1
Ambient temperature, maximum
+45 °C
Frequency range
50 Hz, 60 Hz
Rated control voltage at DC, maximum
28.8 VDC
Voltage, Utilisation category AC15
230 VAC
Stop-Category
0
Earth connection detection
Yes
Mounting
Snaps onto standard DIN rail to EN 60715
Degree of protection of the mounting space
IP54
Rated impulse withstand voltage Uimp
4 kV
Rated AC voltage for controls, 60 Hz, minimum
48 VAC
Pull-in delay at RESET, typically
20 ms
Wire breakage detection
Yes
Removable Terminals
Yes
Number of signalling outputs
6
Number of Snap-in contacts, maximum
6
Height
100 mm
Storage and transport temperature, minimum
-40 °C
Rated operating voltage
48 ... 240 VAC
Feedback circuit
Yes
Integral System Diagnostics, status
Yes
Number of safety contacts
2
Depth
121 mm
Resistance to vibrations to EN 60068-2-6
10...55 Hz, Amplitude 0.35 mm, ± 15 %
Rated AC voltage for controls, 50 Hz, minimum
48 VAC
Contact resistance, maximum
0.1 Ω
Voltage, Utilisation category DC13
24 VDC
Rated control voltage at AC 50 Hz, maximum
240 VAC
Pull-in delay at automatic start, maximum, typically
100 ms
Current, Utilisation category AC-15
6 A
Switching capacity, maximum
2 A
Rated AC voltage for controls at DC minimum
20.4 VDC
Switching frequency, maximum
3 Hz
Conduction resistance, maximum
40 Ω
Note (Contact resistance)
in new state
Rated control voltage at AC 60 Hz, maximum
240 VAC
Drop-out delay in case of emergency, typically
20 ms
Current, Utilisation category DC13
6 A
Electrical power consumption
6.8 W
Drop-out delay in case of power failure, typically
80 ms
Voltage, Utilisation category DC12
24 VDC
Switching capacity, minimum
10 mA
Current, Utilisation category DC12
0.1 A

SRB207AN 230VAC Related Documents