RSS260-D-ST Schmersal Safety Switches

Product Details

• Installation conditions (mechanical)
  not flush
• Duration of risk, maximum
  200 ms
• Hysteresis (Switch distance), maximum
  2 mm
• Height of sensor
  18 mm
• Sensor topology
  Sensor for series wiring
• Safety functions
  Yes
• Number of semi-conductor outputs with signaling function
  1
• Ensured switching distance OFF, front
  18 mm
• Standards
  IEC 60947-5-3
• Active principle
  RFID
• Short circuit detection
  Yes
• Integral System Diagnostics, status
  Yes
• Switch distance Sn
  front 12 mm, lateral 9 mm
• Width of sensor
  39.2 mm
• Enclosure material
  Plastic, thermoplastic, self-extinguishing
• Time to readiness, maximum
  2,000 ms
• Number of fail-safe digital outputs
  2
• Ensured switch distance OFF Sar, lateral
  15 mm
• Ambient temperature, maximum
  +65 °C
• Voltage type
  DC (direct current)
Versions
p-type
Reaction time, maximum
100 ms
Number of LEDs
3
Note (Repeat accuracy R)
Axial offset: The long side allows for a maximum height misalignment (x) of sensor and actuator of 8 mm (e.g. mounting tolerance or due to guard door sagging). The axial misalignment (y) is max. ± 18 mm (see figure: Operating principle). Minimum 100 mm cl
Housing construction form
Block
Coding level according to ISO 14119
Low
general information
Universal coding
Short-circuit recognition
Yes
Cascadable
Yes
Actuating panels
lateral, front side
Repeat accuracy R R
0.5 mm
Ensured switching distance ON, front
10 mm
Terminal Connector
Connector M8
Length of sensor
29.5 mm
Storage and transport temperature, maximum
+85 °C
Rated operating voltage
24 VDC -15% / +10%
Voltage drop Ud, maximum
2 V
Gross weight
47.4 g
Diagnostic output
Yes
Active area
lateral, front
Mounting
A 20 mm screw length usually suffices to mount the sensor. When the mounting plates are used, we recommend 25 mm long screws.
Restistance to shock
30 g / 11 ms
Rated operating voltage, minimum
20.4 VDC
Voltage, Utilisation category DC13
24 VDC
Note
The cable section of the interconnecting cable must be observed for both wiring variants! Cable length and cable section alter the voltage drop depending on the output current
Ambient temperature, minimum
-25 °C
Rated insulation voltage Ui
32 VDC
Required rated short-circuit current to EN 60947-5-1
100 A
Current, Utilisation category DC12
0.05 A
Rated operating voltage, maximum
26.4 VDC
Current leakage Ir
0.5 mA
Interfering radiation
IEC 61000-6-4
Resistance to vibrations to EN 60068-2-6
10 … 55 Hz, amplitude 1 mm
Operating current
600 mA
EMC rating
IEC 60947-3
Current, Utilisation category DC13
0.05 A
Degree of protection
IP65 to EN 60529, IP67 to EN 60529
Overvoltage category
III
No-load supply current I0
100 mA
Rated impulse withstand voltage Uimp
0.8 kV
Degree of pollution to VDE 0100
3
Storage and transport temperature, minimum
-25 °C
Voltage, Utilisation category DC12
24 VDC
Ensured switching distance ON, side
6 mm
Switching frequency, approx.
1 Hz

RSS260-D-ST Related Documents