RSS260-I1-SD-ST Schmersal Safety Switches

Product Details

• Standards
  IEC 60947-5-3
• Number of Series-wiring of sensors
  31
• Active area
  lateral, front
• Mounting
  A 20 mm screw length usually suffices to mount the sensor. When the mounting plates are used, we recommend 25 mm long screws.
• Ensured switch distance OFF Sar, lateral
  15 mm
• Storage and transport temperature, maximum
  +85 °C
• Voltage, Utilisation category DC12
  24 VDC
• Required rated short-circuit current to EN 60947-5-1
  100 A
• EMC rating
  IEC 60947-3
• Coding level according to ISO 14119
  High
• Duration of risk, maximum
  200 ms
• Cascadable
  Yes
• Ensured switching distance OFF, front
  18 mm
• Degree of protection
  IP65 to EN 60529, IP67 to EN 60529
• Rated impulse withstand voltage Uimp
  0.8 kV
• Rated operating voltage, maximum
  26.4 VDC
• Current, Utilisation category DC12
  0.25 A
• Housing construction form
  Block
• Reaction time, maximum
  100 ms
• Short circuit detection
  Yes
Number of semi-conductor outputs with signaling function
1
Switch distance Sn
front 12 mm, lateral 9 mm
Width of sensor
39.2 mm
Storage and transport temperature, minimum
-25 °C
Voltage type
DC (direct current)
Installation conditions (mechanical)
not flush
Gross weight
54 g
Short-circuit recognition
Yes
Repeat accuracy R R
0.5 mm
Ensured switching distance ON, side
6 mm
Ambient temperature, minimum
-25 °C
Switching frequency, approx.
1 Hz
general information
Individual coding
Diagnostic output
Yes
Integral System Diagnostics, status
Yes
Hysteresis (Switch distance), maximum
2 mm
Length of sensor
29.5 mm
Rated insulation voltage Ui
32 VDC
Degree of pollution to VDE 0100
3
Versions
p-type
Active principle
RFID
Time to readiness, maximum
2,000 ms
Actuating panels
lateral, front side
Ensured switching distance ON, front
10 mm
Height of sensor
18 mm
Safety functions
Yes
Sensor topology
Sensor for series wiring
Number of fail-safe digital outputs
2
Note
The cable section of the interconnecting cable must be observed for both wiring variants! Cable length and cable section alter the voltage drop depending on the output current
Resistance to vibrations to EN 60068-2-6
10 … 55 Hz, amplitude 1 mm
No-load supply current I0
100 mA
Current, Utilisation category DC13
0.25 A
Overvoltage category
III
Interfering radiation
IEC 61000-6-4
Serial diagnostics
Yes
Rated operating voltage
24 VDC -15% / +10%
Voltage drop Ud, maximum
2 V
Terminal Connector
Connector M8
Current leakage Ir
0.5 mA
Ambient temperature, maximum
+65 °C
Rated operating voltage, minimum
20.4 VDC
Voltage, Utilisation category DC13
24 VDC
Number of LEDs
3
Enclosure material
Plastic, thermoplastic, self-extinguishing
Restistance to shock
30 g / 11 ms
Operating current
150 mA
Note (Repeat accuracy R)
Axial offset: The long side allows for a maximum height misalignment (x) of sensor and actuator of 8 mm (e.g. mounting tolerance or due to guard door sagging). The axial misalignment (y) is max. ± 18 mm (see figure: Operating principle). Minimum clearance

RSS260-I1-SD-ST Related Documents